White Disposable Foldable Dust Mask , FFP Rating Dust Masks
Hypoallergenic
1 . Descriptions
FFP1 Vertical Foldable Dust Mask use latex-free elastic strap ,
soft nose liner , softer and fit the face,adjustable aluminum nose
clip will make wearing more sealless leakage .These respirator are
CAT.III Personal Protective Equipment(PPE) according to Annex I of
Regulation EU 2016/425. This PPE offers protection against risks of
death or serious and permangent injury.It is assumed that the
person using the PPE does not have the possibility of instantly
verfying any harmful effects.
2. Feature
1. Anti-fog headband FFP grade mask round
2. Hypoallergenic, High filtration, capacity.
3. Elastic ear-loops with no pressure to the ears.
4. Close fit to prevent polluted air from entering.
5. Electrostatic filter material, effectively protect the mask of
PM2.5.
3. How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted.
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
peformance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
4. Certification
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
5 . Expiry date
According to the instructions , products can be used up to 5 years
from date of manufacture.
6 . More pictures
